- My resin printer arrived today. It was a bit obnoxious to get a working print and holy heck it’s a messy process even when it does work, but this’ll be fun to mess with. (Yes, I now have three 3D printers. Only the resin one is actually operable right now, but the Artillery Genius has some repair parts on th eway, at least.)
- I accepted an offer on my condo. It’s a lot less than I was hoping for but it’s still plenty of money. When that sells I can start working on building out the studio, which is the linchpin for getting a bunch of my other house ambitions underway.
- I’m having one heck of a fibro flare and this makes it very hard for me to actually focus on work. But also there’s a stress factor involved. Hopefully that all sorts itself out soon.
- Because of the aforementioned flare I’m also not making much progress on getting my living room or kitchen in any sort of order. But I’m still slowly chipping away at that glacier.
- Cannabis isn’t really helping with the fibro right now, either.
I’ve been on guanfacine for a few days and so far I’m not noticing that my focus has changed any, but on the plus side my blood pressure is great now. So, that’s good.
I don’t know if it’s from the naltrexone or the guanfacine but my dreams have been pretty vivid and weird, but usually in a good way. Unlike when I was on the Wellbutrin and my dreams were vivid and stressful.
So, my main reason for wanting to get a Canvas Hub was to have easy one-click print support that works with the Palette; after playing with Slic3r a bunch last night I then realized I also wanted OctoPrint for its print queue functionality to decouple the print process from Slic3r (which turns out to be rather unstable at times, at least on the Mac). But it turns out that Palette’s OctoPrint plugins work with plain ol' OctoPrint, too. So I looked into building an OctoPrint node… and then realized I was overcomplicating things, since OctoPrint doesn’t actually need dedicated hardware1 — it just needs to be on a computer that’s physically close to the printer and has multiple USB ports available.
My desktop computer is physically close to the printer and has multiple USB ports available.
So I looked to see if OctoPrint runs on macOS, and yes, it does; there’s nothing Linux- or ARM-specific about it, as it’s all written in Python. The macOS-specific guide is an okay starting point, but I saw a few things that could be a bit simpler, so here’s what I settled on.
(Also note that these directions should also work for Linux and even Windows users! There’s no reason to build an OctoPrint hardware node if you already have a computer that lives nearby your printer!)
So my new 3D printer arrived today. I went with the Artillery Genius, since it seemingly had the best blend of features and physical characteristics.
So far I like it, although wow the out-of-box experience could be a lot better. Not from the printer so much as from the software that drives it.
So, I’ve had a Makerbot Replicator Duo since late 2012; I bought it used at a significant discount (“only” $1200!) and it’s served me pretty okay. But over time, better, cheaper printers have come along, and my Replicator has gotten pretty unreliable. Actually it’s been pretty much hobbling along for the last several years:
- The heated print bed stopped heating, due to it shorting out due to a well-known design flaw in the print bed connector1
- One of the last firmware updates made it only compatible with Makerbot’s own proprietary software, which was very soon discontinued to upsell newer Makerbot versions
- The left extruder stopped working at some point; the right extruder barely works
- The hot end really needs new nozzles but the design is such that replacing the nozzle is very easy to crossthread/ruin the hot end2
- And really it’s never been all that great, it was just pretty much the only game in town when I bought it
So anyway, yeah, this upgrade is long-overdue.