It’s day 2 of actual work on the kitchen. Whee.
fluffy rambles (kitchen)
Rambles that are fluffy, by fluffy
I’m not sure why I’m calling this “Remodel II” because this is neither the second kitchen remodel I’ve gone through (it’s the fourth) nor the second I’ve had in this house. But it is the second one on this incarnation of my blog, so that’s probably it.
Anyway, today was demolition day.
Today I finished clearing out my kitchen getting ready for tomorrow’s demolition. Thankfully I actually had a few days to get it done this time, unlike last time when the contractor only let me know the demolition was going to happen at 5 PM the day before.
Because I had time to prepare it meant I could also actually do it in a semi-organized way. Which is good, because I have way less space for “staging” stuff in this house than I did in my last place.
My kitchen renovation starts on Wednesday. Thankfully I have plenty of advance warning this time and have started to pack up the stuff in my kitchen; I need to spend a lot more time finishing that up tomorrow, though. I’ve only put a dent in things.
I hope that the end result of this is I’ll finally get rid of a lot of stuff I’m not using actively, or at least figure out a better way of storing the stuff I rarely use.
The new kitchen design is going to be the same basic layout, but there’s a few nice changes that are going to happen. The lower cabinet next to the refrigerator is going to be replaced with a drawer unit, which will be much more useful for me (I’ll probably move my pots and pans in there, and the rarely-used stuff that currently lives in there goes into the sideboard where those were kept). The weird, awkward storage cabinets that flank the stove will become less-weird storage cabinets, with a utility drawer on top (but still a door down below).
Very soon I will be remodeling my kitchen.
Why yes, it does seem like just yesterday that I did the last one, but that was actually two years and one house ago! That kitchen was mostly-completed right before the pandemic started, and then finally actually-completed a year later, just before I moved out to my new home. Which is a really stupid pattern, where three times in a row I’ve put off a kitchen remodel until it became unavoidable, and then ended up moving out soon after.
I’m hoping that this will not continue the pattern!
While cooking dinner tonight I got a surprising electrical shock off of the handle of one of my pots, which was sitting on a burner which was on but was weirdly not getting hot. So, there’s clearly some awful short circuit in my stove. So it’s time to replace that.
As usual I’ve been wanting an induction stove anyway, but I was hoping to hold off until I could properly redo my kitchen. I sort of had the idea that I’d be reconfiguring it to have a built-in oven and a smaller cooktop in order to have more prep space, since my kitchen is pretty tiny. But I guess it isn’t the worst thing to upgrade the stove before everything else, right?
More importantly, I was hoping to hold off until my condo sold and I had, y'know, plenty of money for this. All the induction ranges I’m interested in cost considerably more than I feel comfortable paying right now. Although there’s one Samsung model that I like and is fairly affordable, but also it has about a 6-week wait right now.
It seems like it’s only one burner that’s shorting out, but that’s one too many for my comfort.
I’m sure I could tear the stove down and find where the electrical fault is, but, jeeze, I’m not all that interested in messing with 240V stuff.
Update: Home Depot had the Samsung in stock and ready for delivery/installation August 10, so I just went ahead and ordered it. Ugh.
Update 2: Oh right August 10 is a busy day for me, I should see if I can reschedule it to the 11th
Update 3: It is rescheduled, yay. Home Depot works, sometimes.
Seattle, 2007: Redid my kitchen, ended up getting a job in San Francisco a month later
San Francisco, 2012: Redid my kitchen, ended up getting a job back in Seattle a month later
Seattle, 2020: got a kitchen remodel mostly done, last little project kept on getting pushed back for a year, and finally got scheduled… for the day before my move to White Center
At least I was able to enjoy (most of) my new kitchen for a whole year this time.
Given the state of the kitchen in my new place I think that will be one of the first things I do once my condo sells, just so that I can possibly experience a whole new form of my life being upended as soon as it’s completed.
I’m starting to suspect that I’ve actually had mice all these years, and Fiona just made sure I didn’t know about it.
When my old kitchen was being demolished I noticed that there were signs of mouse droppings in my sink cabinet, but no signs of mice. I also noticed that there were a bunch of gaps in the drywall behind the sink, and because of the… odd construction of this historical building it seemed likely that mice were able to occasionally get in, but didn’t stick around since they had nowhere to go.
Well, last night while working at the computer I felt something furry brush against my foot, and I looked down and it wasn’t Fiona. Then a few minutes later I saw something move out of the corner of my eye, and a little mouse peeked out from under my equipment shelving system and then scurried back underneath. (Fiona was, of course, asleep nearby and didn’t seem interested in me gesticulating at said shelving system.)
This was the day of finishing. It… isn’t quite finished. (Is anything, really?)
But what’s left to do can wait.
Bet y'all are happy that soon the big payoff will be posted! I sure am happy that there’ll be a big payoff to post soon, personally.
Today my stove and dishwasher arrived. I wired up the stove’s power cord and found that I need to properly level it before it’ll slide in and I was worried about damaging my cabinets, so I decided to wait for the contractor to be able to take care of it. But I did at least get a chance to try it out with my cast-iron pan (affiliated link). It’s pretty quiet, and gives much better temperature control than the induction hotplate (affiliated link) I’ve been using in the meantime; the Max Burton seems to be like… low hot HOT HOTTT HOTTTTTT!!!! HOTTTTTTTTTT!!!!!! PLASMABALL!!!!!!!!!!!!!!!! and then there’s 5 more heat settings. This one isn’t like that.
One of the bits that was left over from the installation was an extra lighting module, which seems to be the same as the ones that are installed. It’s an L&S Nova Emotion, which it turns out has a bunch of features that are available with the matching driver.
Mine didn’t come with the matching driver.
Well okay it’s not that many features, but it has variable color temperature (and possibly brightness?), and Bluetooth remote control support, as well as touch control built-in.
Sorry about the sudden backfill of entries; I was posting progress photos on Facebook (mostly for my mom’s benefit) but the response to them has been positive enough that I figured I’d also post them here. Some of the text might be redundant as a result with other things I posted about here already.
I also did my best to merge the Facebook version of the day 5 demi-disaster with this one but it ends up a little weird. Anyway there’s photos now in case you already read that entry.
Huge progress. All of the cabinets are in the right place, the range hood is installed in a way that DOESN’T have spikes coming up from my living room floor, and the electrician also came and finally updated my outlets to GFIs (which I’ve only been putting off for the past 8 years) while also adding the switched outlet for the under-cabinet lights.