Current goings-on fluffy rambles
I haven’t posted any bloggy things in a while, and I know folks start to worry if I haven’t posted in a while. So,
Music, comics, art, and other stuff, all in one gigantic pile. The web of yesterday, tomorrow!
I haven’t posted any bloggy things in a while, and I know folks start to worry if I haven’t posted in a while. So,
I’ve finally gotten a handle on my resin printer and have gotten some successful prints! Here’s some of what I did to get it to a good state:
So far I haven’t gotten a fully-successful resin print, but I’m inching closer and closer.
The current issue I keep running into is that it’s very difficult to separate a print from the bed, and I think I need to give up on having a good clean bed-adhered surface. It’s better to give all prints lift and support, probably, even if that means having more tiny surface defects on the side facing the build plate (which is better than having an entire shattered print when I inevitably resort to a hammer to separate it).
I also ran into a problem where somehow a bit of resin got underneath my FEP film (hopefully due to my own carelessness and not due to a leak I haven’t found on my vat!) and some resin got caked to the LCD. Fortunately, Phrozen’s suggestion of soaking it in 91% IPA and then using the plastic scraper to get it off worked just fine.
Anyway. For now I’m still stuck trying to sun-cure my prints, but hopefully I can figure out a decent cheap curing station setup. I’m thinking of building a curing box using UV LED strips but it’s so hard to find reliable parts for that sort of thing. I also ordered a cheap curing station off Amazon but I’m not expecting great results from it.
In the meantime, my FDM printer is working again, and now that I have a decent supply of isopropyl alcohol I can actually get prints to stick to the build plate!
I haven’t even put printer #3 through its paces yet, and I’ve just bought printer #4. Fortunately it’ll be a while before it gets here, and also I’ve been wanting a ceramic printer for even longer than I’ve been wanting a resin printer.
But, jeeze.
Anyway I both bought the printer and an extra bed, and also an extra extruder assembly with the notion of possibly converting a larger-format printer into ceramic printing. Or food printing, which this is apparently usable for too!
I’ve been on guanfacine for a few days and so far I’m not noticing that my focus has changed any, but on the plus side my blood pressure is great now. So, that’s good.
I don’t know if it’s from the naltrexone or the guanfacine but my dreams have been pretty vivid and weird, but usually in a good way. Unlike when I was on the Wellbutrin and my dreams were vivid and stressful.
A week ago I bought some wood-filled PLA, and I’ve been experimenting with it a bit to see how to make it actually look like wood.
The first thing I printed (a Pocket Operator case) just looked like it was printed with boring beige filament, even after being sanded:
I’ve been very much enjoying the Flair, and have gotten very used to pulling shots with it. Since the making of the video I’ve streamlined my morning routine, and also started using a cork trivet as a tamping pad, which is easier on my countertops and the portafilter.
The big downside to the cheapest Flair model is it doesn’t really come with a tamper though, it just comes with a dosing cup that sort of doubles as one. But it’s not very good.
A few days ago my Palette 2S arrived, and I’ve been having some amount of fun with it. I won’t do a full review of it (there are plenty of those on YouTube, after all) but I’d like to talk about some of the things I’ve learned and how I have it set up.
I need to remember to look at the good stuff that’s going on right now, so here’s some good things.1